|
|
 |
Here we have one of the most sought after items for your H1 (d,e,f) or
H2 (a,b,c,) Kawasaki Triple.
Many years ago when these items became No Longer Available at your
local Kawasaki Dealer they cost: 5/8ths Master Cylinder $300.00 Pipe
$14.00 Twin Split $80.00 Caliper $340.00
We invested a LOT of Money having a small number of these kits
reproduced - they are PERFECT reproductions - an expert would seriously
struggle to find a discrepancy compared with the original kit.
This kit will seriously improve the braking on your triple, not only
that but it will also enhance the looks and the value of your bike!
Sorry, out of stock and no plans for a re-run |
 |
Stainless steel brake piston kits are available
for all the triples : £27.75 |
 |
Brake shoes and pads are available for most
triples - We only sell the OLDER style brake pads that have softer
compounds, they work well and don't wear those hard to find discs
out! Beware of many modern "FA55" brake pads - THEY DON'T
FIT!
|
 |
Perfect reproduction steel brake pipes
£13.50 |
 |
Front brake shoes for the 1969 -1971 H1's Front brake shoes for S1/S2
£16.50 a set
Rear shoes for the H2 are £21.50 a set
Rear shoes for the H1 are £18.50 a set
Rear shoes for the S1/S2/S3/KH250/400 are £17.00 a set
|
 |
The "Stanley" tail piece reflector for a H2/H2a (and
others) £12.50ea |
 |
Reproduction rear lamp lenses for the S1b, S1c,
S3, KH250, KH400, H2b, H2c, Z1, Z1a, Z1b etc - Just £6.00 |
 |
Exhaust sealing rubbers - these are £19.00
for a set of Three, or £7.00 each. These are HIGH QUALITY seals made
from the very best compounds, do not get confused with some other poor
quality reproductions that are available. |
 |
Engine oil seals and gaskets sets - we have them
all.
Gasket sets are between £26.00 - £28.50
Oil seal sets are Generally £26.50
|
 |
These H2/H2a panels are indistinguishable from
the original item once painted - £28.00 |
 |
This H2 Panel comes in the correct Blue -
£75.00 (You will pay £60.00 to have One painted!) |
 |
With New Old Stock Handbooks getting rarer and
rarer and selling on Ebay for as much as £200 each! These excellent
reproduction handbooks for the 1971 -1972 H2 and the 1973 H2a are a bargain at £25.00 |
 |
A new line for us - these H2c owners handbooks
are superb!! They really are virtually indistinguishable from the original
items! £25.00 |
 |
Not a great picture but we also have excellent repro
side panel knobs to hold that H2 panel in place. £14.50ea |
 |
Reproduction indicators look the part! (S1b,
S1c, KH250, S3, KH400, H1d, e, f, KH, H2b, H2c) Less than £80 for a full set including stems! |
 |
Front disc and rear sprocket locking tabs :
£10.00 a set |
 |
Master cylinder repair kits for standard and
5/8ths cylinders : £28.50 we also supply rebuilt 5/8ths cylinders on an exchange
basis. |
 |
H2 reproduction tail trims. £10.00ea |
 |
Standard or "V" rated spark plugs. Standard
Plugs : £2.40ea - Please note that all new standard B9HS plugs
now come with a non removable conection tip, the ones we supply can still be
removed.
"V" Rated Plugs : £6.50ea |
 |
QUALITY Points for the S & H series : £15.50 set of
three. (Yes, you can buy points made in Tawain for £6.00 for three - you
can then spend hours waiting at the side of the road for a recovery truck!) |
 |
Sprocket sets come with a massive choice of chain
types.
Front Sprockets (All models & sizes) £8.75ea
Rear sprockets:
H2 : £18.25
H1 : £17.50
S1, S2, KH250, S3, KH400 etc : £16.50
WE DO THE BEST PRICES! on chains - problem is that there are
approximately 8 different types to choose from - prices can vary between
£21.00 and £132.00
|
 |
Reproduction tool bags £10.00 |
 |
Internal tail piece plates - NOW IN
STOCK! £22.00 |
 |
K&N style or even gauze filters for
those 34mm Mikuni's.
|
 |
Standard X head screw sets
£14.50 a set |
 |
Front sprocket washers - CHECK YOURS NOW!
~ £4.25 |
 |
A Great Genuine Item this one - "S" Series rotor
Puller £11.00 |
 |
You need these to win that show - These are
perfect repro 13mm headed Handle bar clamp bolts - Not the 12mm available
now Sorry, temporarily out of stock |
 |
Just a few of these GENUINE S3 top end sets left
£20! |
 |
These repro horns for the 1973 - 1975 triples
are as close as you get! £22.50 |
 |
H1, S1, H2, Z1, Z1000 Genuine European headlamp
rims NO LONGER AVAILABLE FROM KAWASAKI : £30.00 |
 |
H1 & H2 Tacho cables - special offer
now on! - |
 |
H1 & H2 fuel tap front seal - £5.75 |
 |
Re Plated H2 Head Bolts and washers £18.00
a set of Four or £12.00 a set exchange. |
| |
|
 |
Unlikely that you will recognise this item. It
is a reproduction grommet for the wiring on the Z1/Z900 alternator - get rid
of that oil leak now! |
 |
Another perfect reproduction part - that side
panel bolt for your H1d/e/f - £7.75 |
 |
A NEW ITEM! - A perfect reproduction side cover
bolt for your H2b / H2c - £25.00 a pair |
 |
Low speed windings failed on your H2? - Fix it
yourself - these re-manufactured low speed coils cost £43.00 |
 |
A Top Quality Air filter for your H2
£10.00 |
 |
The KH250 Airfilter has been No Longer Available
for a couple of years now - The retail was around £25.00 - OUT OF STOCK |
 |
A very good quality repro "Top Trumpet" for your
H2 £35 |
 |
Reproduction grab rails
for the H2b/c are in stock but VERY limited quantities - Price
£70 - we also have reproduction grab rails for the S1b/S1c/S3/S3a
|
 |
A set of Four correct front mudguard screws for your Triple : £7.00 |
 |
Here is a New Old
Stock ignition box for a A1/A7 at a fraction of the retail : £90.00 |
 |
A pair of pattern silencers for the later Z650's
: £120.00
|
 |
A pair of GENUINE JARDINE
silencers for the Z900/Z1000LTD : SOLD |
 |
PERFECT reproduction double disc conversions for
H1b/d/e/f H2/a/b/c Sorry now out of stock & no plans for a re-run |
 |
H1, S1, S2 Mirrors, these repro mirrors are VERY
close to the original spec' - They are for all models that do not have
the built in mirror boss £22.75pr |
 |
These stainless steel mirrors are a very close
replacement for the original items - they are also 50%cheaper than the
genuine item £22.75pr |
 |
We have reproduction bars for all the Triples
(And Z1's), the H2 Ones have the weights and all are PERFECT copies - prices
vary and for the H2 weighted bars it can be costly - ask us about PERFECT H2
bars that are un weighted and consequently are cheaper to ship. "S" series
flat "Euro bars : £16.00
"S" series U.S. Spec : £35.00
H1 series U.S. Spec : £35.00
H2 Series High bars : £45.00
H2 Series High bars (without weights for cheaper shipping) : £45.00
Other companies sell supposed "Reproduction" triple
handle bars - none are of the quality and accuracy of these - we are running
out fast and will not be re-ordering for 6 Months! |
 |
H2's are notorious for slipping clutches - often
the springs tend to weaken with old age (they were never good in the first
place) replacing the springs without changing the plates is often the
solution. These clutch springs are 10% heavier than standard and will work
well on all bikes up to 85BHP - Just £12.50 a set |
 |
S1/KH250 Piston kits - set of 3 with rings
and pin etc £67.00
(Japanese after market) |
 |
Wiseco piston kits for H1 & H2
STD, +.5mm, +1.0mm. H1:£215.00 / H2: £215.00
+1.5mm, +2.0mm. H1:£230.00 / H2: £235.00 |
 |
Full set of petrol pipes - all models £7.50 |
 |
The S3 float bowl gasket is no longer available
- we have had them re-manufactured in Neoprene £7.00ea |
